KNIPEX
Cobra Water Pump Pliers, 250 mm
Push-button adjustment with self-locking jaws that grip harder under load.
87-01-250 · Each
$74.95 Available to order, 2–3 weeks
Photography shows the tool type. Studio shots of this exact part are being added. Call us if you need to see the actual item before ordering.
Electronic Super Knips, 125 mm
Flush-cutting precision nippers for component leads down to 0.2 mm.
- Part number
- 78-61-125
- Sold as
- Each
- Made in
- Germany
- Length
- 125 mm
- Cutting capacity, soft wire
- 0.2 – 1.6 mm
- Cutting capacity, medium wire
- 0.2 – 1.0 mm
- Cut type
- Flush, without bevel
$62.95 MSRP · taxes calculated at checkout
Available to order, 2–3 weeks
- Dispatched in 1–2 business days · free over $149.00
- 30-day returns, unused and in original packaging
- Questions? +1 (202) 899-9143 or sales@exelprod.com
The bench standard for trimming component legs. Ground to a true flush cut, so a lead comes off level with the solder joint and needs no second pass.
The edge is fine enough that hard wire will notch it. Soft copper and component leads only. For piano wire use a cutter rated for it. Fitted with an opening spring and a box joint for the alignment that flush cutting depends on.
| Length | 125 mm |
|---|---|
| Cutting capacity, soft wire | 0.2 – 1.6 mm |
| Cutting capacity, medium wire | 0.2 – 1.0 mm |
| Cut type | Flush, without bevel |
| Edge hardness | ≈64 HRC |
| Joint | Box joint, with opening spring |
| Part number | 78-61-125 |
| Weight | 62 g |
| Country of manufacture | Germany |
Specifications are published as supplied by the manufacturer. If anything here conflicts with the maker’s current data sheet, tell us and we will correct it.
What is covered
Covered against defects in material and manufacture. Edge damage from cutting material outside the stated capacity is not covered.
Limitations
Warranty covers defects in material and manufacture only. It does not cover normal wear, consumable items, corrosion, or damage caused by using a tool outside its stated capacity or for a purpose it is not designed for. Where a product page states a specific exclusion, that exclusion applies.
Making a claim
Contact us at support@exelprod.com or +1 (202) 899-9143 with your order number and a photograph of the fault. We handle the claim with the manufacturer on your behalf; you do not deal with them directly.
This warranty is in addition to, and does not affect, your statutory rights. Full terms are on our warranty page.
Dispatch
In-stock items are dispatched within 1–2 business days of order. Orders placed before 14:00 ET on a business day are picked the same day. This item is available to order with a lead time of 2–3 weeks.
Carriers
We ship with Canada Post, UPS, Purolator. Delivery is free on orders over $149.00; below that a flat rate of $14.95 applies. Tracking is emailed when the label is created.
Returns
Unused items in original packaging may be returned within 30 days. Sharpening stones that have been wetted, abrasives that have been opened, and saw blades removed from their sleeve cannot be returned for hygiene and condition reasons unless faulty.
Also in Pliers & Cutters
Related products
KNIPEX
Alligator Water Pump Pliers, 250 mm
Slim-profile groove-joint pliers with a 20° angled head for confined work.
88-01-250 · Each
$52.95 Available to order, 2–3 weeks
KNIPEX
Combination Pliers, 180 mm
General-purpose forged combination pliers with induction-hardened cutting edges.
03-02-180 · Each
$44.95 Available to order, 2–3 weeks
GodHand
SPN-120 Ultimate Nipper, Single-Edge
Single-bevel nipper that slices plastic sprue without stress-whitening the cut.
SPN-120 · Each
$89.00 In stock