Bahco
Engineering File Set, 5 Piece, 200 mm
Flat, half-round, round, square and triangular files in a second-cut grade.
1-478-08-1-0 · Set of 5
$72.00 Available to order, 2–3 weeks
Photography shows the tool type. Studio shots of this exact part are being added. Call us if you need to see the actual item before ordering.
Float File, Fine, 200 mm, Flat
Rows of fine shearing edges that slice end grain instead of tearing it.
- Part number
- IW-200F
- Sold as
- Each
- Made in
- Japan
- Length
- 200 mm
- Cut
- Fine
- Section
- Flat
- Tooth form
- Continuous shearing rows, not raised teeth
$68.00 MSRP · taxes calculated at checkout
Available to order, 3–4 weeks
- Dispatched in 1–2 business days · free over $149.00
- 30-day returns, unused and in original packaging
- Questions? +1 (202) 899-9143 or sales@exelprod.com
A float is not a rasp. Instead of individual raised teeth it has continuous rows of very fine shearing edges, so it cuts wood the way a plane iron does rather than scraping it.
On end grain and dense hardwood it leaves a surface that needs almost no sanding, which is the point, because sanding end grain evenly is difficult.
For wood only. Metal will destroy the edges.
| Length | 200 mm |
|---|---|
| Cut | Fine |
| Section | Flat |
| Tooth form | Continuous shearing rows, not raised teeth |
| Intended material | Wood and horn only, not metal |
| Part number | IW-200F |
| Weight | 124 g |
| Country of manufacture | Japan |
Specifications are published as supplied by the manufacturer. If anything here conflicts with the maker’s current data sheet, tell us and we will correct it.
What is covered
Consumable. Covered against manufacturing defect only.
Limitations
Warranty covers defects in material and manufacture only. It does not cover normal wear, consumable items, corrosion, or damage caused by using a tool outside its stated capacity or for a purpose it is not designed for. Where a product page states a specific exclusion, that exclusion applies.
Making a claim
Contact us at support@exelprod.com or +1 (202) 899-9143 with your order number and a photograph of the fault. We handle the claim with the manufacturer on your behalf; you do not deal with them directly.
This warranty is in addition to, and does not affect, your statutory rights. Full terms are on our warranty page.
Dispatch
In-stock items are dispatched within 1–2 business days of order. Orders placed before 14:00 ET on a business day are picked the same day. This item is available to order with a lead time of 3–4 weeks.
Carriers
We ship with Canada Post, UPS, Purolator. Delivery is free on orders over $149.00; below that a flat rate of $14.95 applies. Tracking is emailed when the label is created.
Returns
Unused items in original packaging may be returned within 30 days. Sharpening stones that have been wetted, abrasives that have been opened, and saw blades removed from their sleeve cannot be returned for hygiene and condition reasons unless faulty.
Also in Files & Rasps
Related products
Auriou
Cabinetmaker's Rasp, 250 mm, Grain 11
Hand-stitched rasp whose irregular teeth leave no tracking lines.
AU-250-11 · Each
$245.00 Available to order, 6–8 weeks
Narex
Needle File Set, 6 Piece, 140 mm
Fine files for detail work in small openings, keyways and model work.
891200 · Set of 6
$38.00 In stock