Narex
Bevel Edge Bench Chisel Set, 6 Piece, 6–26 mm
Chrome-manganese bench chisels with hornbeam handles. The standard first proper set.
863010 · Set of 6
$129.00 In stock
Photography shows the tool type. Studio shots of this exact part are being added. Call us if you need to see the actual item before ordering.
Bench Chisel, 12 mm, Hornbeam Handle
High-carbon Solingen steel at 61 HRC, ready to hone straight from the box.
- Part number
- 1001-12
- Sold as
- Each
- Made in
- Germany
- Width
- 12 mm
- Steel
- High-carbon, Solingen
- Hardness
- ≈61 HRC
- Bevel angle as supplied
- 25°
$46.00 MSRP · taxes calculated at checkout
In stock 14 on hand
- Dispatched in 1–2 business days · free over $149.00
- 30-day returns, unused and in original packaging
- Questions? +1 (202) 899-9143 or sales@exelprod.com
Two Cherries use a high-carbon steel taken to around 61 HRC. Harder than the chrome-manganese alternatives, so the edge lasts longer between honings and takes a keener polish. The trade-off is that it will rust if left damp, and it is less forgiving if you catch a nail.
Backs are lapped at the factory to a usable standard, so setup is short compared with most chisels at this price.
| Width | 12 mm |
|---|---|
| Steel | High-carbon, Solingen |
| Hardness | ≈61 HRC |
| Bevel angle as supplied | 25° |
| Handle | Hornbeam, lacquered |
| Corrosion note | High-carbon steel: oil the blade for storage |
| Part number | 1001-12 |
| Weight | 198 g |
| Country of manufacture | Germany |
Specifications are published as supplied by the manufacturer. If anything here conflicts with the maker’s current data sheet, tell us and we will correct it.
What is covered
Covered against defects in material and manufacture. Corrosion is not covered.
Limitations
Warranty covers defects in material and manufacture only. It does not cover normal wear, consumable items, corrosion, or damage caused by using a tool outside its stated capacity or for a purpose it is not designed for. Where a product page states a specific exclusion, that exclusion applies.
Making a claim
Contact us at support@exelprod.com or +1 (202) 899-9143 with your order number and a photograph of the fault. We handle the claim with the manufacturer on your behalf; you do not deal with them directly.
This warranty is in addition to, and does not affect, your statutory rights. Full terms are on our warranty page.
Dispatch
In-stock items are dispatched within 1–2 business days of order. Orders placed before 14:00 ET on a business day are picked the same day.
Carriers
We ship with Canada Post, UPS, Purolator. Delivery is free on orders over $149.00; below that a flat rate of $14.95 applies. Tracking is emailed when the label is created.
Returns
Unused items in original packaging may be returned within 30 days. Sharpening stones that have been wetted, abrasives that have been opened, and saw blades removed from their sleeve cannot be returned for hygiene and condition reasons unless faulty.
Also in Chisels & Woodworking
Related products
Narex
Mortise Chisel, 8 mm
Thick-section chisel built to lever waste out of a mortise without flexing.
811008 · Each
$42.50 In stock
pfeil
Carving Gouge, No.7 Sweep, 10 mm
Swiss carving gouge sharpened at the factory and usable on arrival.
PFEIL-7-10 · Each
$58.00 Available to order, 3–4 weeks
Crown Hand Tools
Paring Chisel, 25 mm, Rosewood Handle
Long, thin-section Sheffield chisel for hand pressure only, never a mallet.
CROWN-176 · Each
$54.00 In stock