Photography shows the tool type. Studio shots of this exact part are being added. Call us if you need to see the actual item before ordering.
Ryoba Double-Edge Pull Saw, 240 mm
Rip teeth on one edge, crosscut on the other, in a 0.6 mm impulse-hardened plate.
- Part number
- SZ-R240
- Sold as
- Each
- Made in
- Japan
- Blade length
- 240 mm
- Plate thickness
- 0.6 mm
- Rip edge
- ≈8 TPI
- Crosscut edge
- ≈15 TPI
In stock 26 on hand
- Dispatched in 1–2 business days · free over $149.00
- 30-day returns, unused and in original packaging
- Questions? +1 (202) 899-9143 or sales@exelprod.com
A ryoba is two saws in one plate. Coarse rip teeth along one edge for cutting with the grain, finer crosscut teeth along the other for cutting across it. Using the wrong edge is the most common mistake and it shows immediately in how hard the saw is to push.
Because Japanese saws cut on the pull stroke the plate stays in tension and can be made much thinner than a Western saw. At 0.6 mm the kerf is roughly half that of a panel saw, which means less material removed, less effort, and a cut you can follow accurately.
The teeth are impulse-hardened. They stay sharp far longer than an unhardened tooth but cannot be resharpened. When the blade is done, you fit a new one rather than filing it.
| Blade length | 240 mm |
|---|---|
| Plate thickness | 0.6 mm |
| Rip edge | ≈8 TPI |
| Crosscut edge | ≈15 TPI |
| Teeth | Impulse-hardened, not resharpenable |
| Handle | Rattan-wrapped, straight |
| Cut direction | Pull stroke |
| Part number | SZ-R240 |
| Weight | 218 g |
| Country of manufacture | Japan |
Specifications are published as supplied by the manufacturer. If anything here conflicts with the maker’s current data sheet, tell us and we will correct it.
What is covered
Covered against defects in material and manufacture. Blades are consumable; tooth wear from normal use is not covered.
Limitations
Warranty covers defects in material and manufacture only. It does not cover normal wear, consumable items, corrosion, or damage caused by using a tool outside its stated capacity or for a purpose it is not designed for. Where a product page states a specific exclusion, that exclusion applies.
Making a claim
Contact us at support@exelprod.com or +1 (202) 899-9143 with your order number and a photograph of the fault. We handle the claim with the manufacturer on your behalf; you do not deal with them directly.
This warranty is in addition to, and does not affect, your statutory rights. Full terms are on our warranty page.
Dispatch
In-stock items are dispatched within 1–2 business days of order. Orders placed before 14:00 ET on a business day are picked the same day.
Carriers
We ship with Canada Post, UPS, Purolator. Delivery is free on orders over $149.00; below that a flat rate of $14.95 applies. Tracking is emailed when the label is created.
Returns
Unused items in original packaging may be returned within 30 days. Sharpening stones that have been wetted, abrasives that have been opened, and saw blades removed from their sleeve cannot be returned for hygiene and condition reasons unless faulty.
Goes with this
Accessories & consumables
Also in Hand Saws
Related products
Gyokucho
Razorsaw Ryoba No.372, 240 mm
The replaceable-blade ryoba most Western cabinet shops standardise on.
GYO-372 · Each
Gyokucho
Razorsaw Dozuki No.615, 240 mm
Spine-backed joinery saw with a 0.3 mm plate for dovetails and tenon shoulders.
GYO-615 · Each
SUIZAN
Flush-Cut Pull Saw, 120 mm
Unset teeth on a flexible plate for trimming dowels and plugs level with a surface.
SZ-F120 · Each
Gyokucho
Replacement Blade for Razorsaw Ryoba No.372, 240 mm
Spare plate for the No.372 ryoba handle.
GYO-372-B · Each